Energy Bill Concerns

Traditional heating and cooling systems each employ similar practices – using one or two thermostats to control the temperatures of each room in the building, resulting in rooms that are rarely comfortable and spaces that become unusable in extreme weather. Whereas mini splits can be installed in individual spaces to provide perfect comfort for every space.

• WiFi capable with the purchase of an add-on module.
• I-Feel function communicates between outdoor and indoor unit to keep temperature consistent and comfortable.
• Intelligent auto restart will resume power after a power failure.

Inverter technology permits systems to fine-tune heating and cooling output to deliver the precise amount of air needed at any given time. For example, a 12,000 BTU system may operate more efficiently at 9500 BTU (or less). This aids in reducing energy consumption but still delivers a high comfort level to the user.

• I-Feel function communicates between outdoor and indoor unit to keep temperature consistent and comfortable.
• Intelligent defrost automatically initiates defrost mode to prevent unit freezing.
• Intelligent auto restart will resume power after a power failure.

Traditional heating and cooling systems each employ similar practices – using one or two thermostats to control the temperatures of each room in the building, resulting in rooms that are rarely comfortable and spaces that become unusable in extreme weather. Whereas mini splits can be installed in individual spaces to provide perfect comfort for every space.

• WiFi capable with the purchase of an add-on module.
• Intelligent auto restart will resume power after a power failure.

Inverter technology permits systems to fine-tune heating and cooling output to deliver the precise amount of air needed at any given time. For example, a 12,000 BTU system may operate more efficiently at 9500 BTU (or less). This aids in reducing energy consumption but still delivers a high comfort level to the user.

• I-Feel function communicates between outdoor and indoor unit to keep temperature consistent and comfortable.
• Intelligent defrost automatically initiates defrost mode to prevent unit freezing.
• Intelligent auto restart will resume power after a power failure.

The temperature of each zone can be set to individual needs or even be turned off in unoccupied spaces without affecting other zones.

• Self-diagnosis shuts down system during abnormal operation and displays an error code.
• I-Feel function communicates between outdoor and indoor unit to keep temperature consistent and comfortable.
• Intelligent auto restart will resume power after a power failure.

The temperature of each zone can be set to individual needs or even be turned off in unoccupied spaces without affecting other zones.

• Intelligent defrost automatically initiates defrost mode to prevent unit freezing.
• G10 Inverter provides low noise levels reduces power consumption.

ENHANCED AIR HANDLER WITH VARIABLE SPEED AND COMMUNICATING CONTROLS

•  Upflow, horizontal, and downflow capable
•  Self diagnostics saves last 10 fault codes regardless of power interruption

The Pro Series is about control. It’s about creating your environment, your way. So your contractor will make sure you have the exact features you want in your Pro Series system, that match your exact needs.

• Dual fuel capability when paired with a matched gas furnace
• Comfort Sync thermostat and indoor unit required

COMPACT AIR HANDLER

•  External access to heater circuit breakers
• Foil faced insulation for enhanced indoor air quality

The slim style design is about half the size or less than a traditional style condensing and will occupy less space.

• Uses Less Space Than a Traditional AC Unit
• Goldfin Coil Coating for Extended Protection

An air handler, or air handling unit (often abbreviated to AHU), is a device used to regulate and circulate air as part of a heating, ventilating, and air-conditioning (HVAC) system.

• Use any 24V thermostat controller including smart thermostats (not included).
• High efficiency DC fan motor
• Multi position installation.
• Option to connect using sweat braze fitting or flare fitting.

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

• Permanently lubricated condenser fan motor needs no annual maintenance.

ENHANCED AIR HANDLER WITH VARIABLE SPEED AND COMMUNICATING CONTROLS

•  Upflow, horizontal, and downflow capable
•  Self diagnostics saves last 10 fault codes regardless of power interruption

The Pro Series is about control. It’s about creating your environment, your way. So your contractor will make sure you have the exact features you want in your Pro Series system, that match your exact needs.

• 5 year limited warranty
• Swept wing fan blade and compressor sound blanket significantly reduce noise levels
• Heavy-duty compressor sound blanket for quiet operation

COMPACT AIR HANDLER

•  External access to heater circuit breakers
• Foil faced insulation for enhanced indoor air quality

The AC Pro system provides state of the art heating & air conditioning that won’t break the bank. With its ultra-efficient inverter technology, ultra-quiet sound levels and small size, it’s sure to be a fit for any home. Talk to your contractor about what options are available to best suit your needs.

• Condenser sizes can be converted using dip switch setting while out in the field.
• Compatible with any 24V thermostat including smart thermostats. Wide operating range for cooling demand in extreme high or low
• Compatible with any third party air handler, gas furnace not required.

An air handler, or air handling unit (often abbreviated to AHU), is a device used to regulate and circulate air as part of a heating, ventilating, and air-conditioning (HVAC) system.

• Use any 24V thermostat controller including smart thermostats (not included).
• High efficiency DC fan motor
• Multi position installation.
• Option to connect using sweat braze fitting or flare fitting.

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

•  Internally protected against high temperature motor overload conditions

A-Series Packaged Heat Pump 3 Ton 16 SEER 12 EER 8.2 HSPF 208/230V Single Phase Two Stage

A-Series Packaged Heat Pump 3 Ton 14 SEER 11 EER 8 HSPF 208/230V Single Phase Single Stage

• Defrost control boards with selectable time intervals and
• Additional insulation reduces sound and minimizes heat loss.
• Horizontal or down discharge capable.

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Variable speed ECM motor and two stage gas valve for precise airflow
• Compatible with comfort sync communicating thermostat
• Self diagnostics saves last 5 fault codes regardless of power interruption

The Pro Series is about control. It’s about creating your environment, your way. So your contractor will make sure you have the exact features you want in your Pro Series system, that match your exact needs.

• 5 year limited warranty
• Swept wing fan blade and compressor sound blanket significantly reduce noise levels
• Heavy-duty compressor sound blanket for quiet operation

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Compact height for installation in low ceiling applications
• Qualifies as a low leakage air-handling unit
• Self diagnostics saves last 10 fault codes regardless of power interruption.
• Ultra Low NOx Gas Furnace

The AC Pro system provides state of the art heating & air conditioning that won’t break the bank. With its ultra-efficient inverter technology, ultra-quiet sound levels and small size, it’s sure to be a fit for any home. Talk to your contractor about what options are available to best suit your needs.

• Condenser sizes can be converted using dip switch setting while out in the field.
• Compatible with any 24V thermostat including smart thermostats. Wide operating range for cooling demand in extreme high or low
• Compatible with any third party air handler, gas furnace not required.

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Communicating control enabled
• Thermostat flexibility:works with the Comfort Sync T-Stat or a conventional 24V T-Stat
• Self diagnostics saves last 5 fault codes regardless of power interruption
• "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

•  Internally protected against high temperature motor overload conditions

An 80% AFUE* means the 80G1 converts a full 80% of the fuel it consumes into usable heat. That can help you spend less on energy every month

• Compact height for installation in low ceiling applications
• Self diagnostics help easily identify problems
• Qualifies as a low leakage air-handling unit

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

•  Internally protected against high temperature motor overload conditions

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Variable speed ECM motor and two stage gas valve for precise airflow
• Compatible with comfort sync communicating thermostat
• Self diagnostics saves last 5 fault codes regardless of power interruption

The Pro Series is about control. It’s about creating your environment, your way. So your contractor will make sure you have the exact features you want in your Pro Series system, that match your exact needs.

• Dual fuel capability when paired with a matched gas furnace
• Comfort Sync thermostat and indoor unit required

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Compact height for installation in low ceiling applications
• Qualifies as a low leakage air-handling unit
• Self diagnostics saves last 10 fault codes regardless of power interruption.
• Ultra Low NOx Gas Furnace

The slim style design is about half the size or less than a traditional style condensing and will occupy less space.

• Uses Less Space Than a Traditional AC Unit
• Goldfin Coil Coating for Extended Protection

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Communicating control enabled
• Thermostat flexibility:works with the Comfort Sync T-Stat or a conventional 24V T-Stat
• Self diagnostics saves last 5 fault codes regardless of power interruption
• "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

• Permanently lubricated condenser fan motor needs no annual maintenance.

An 80% AFUE* means the 80G1 converts a full 80% of the fuel it consumes into usable heat. That can help you spend less on energy every month

• Compact height for installation in low ceiling applications
• Self diagnostics help easily identify problems
• Qualifies as a low leakage air-handling unit

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

• Permanently lubricated condenser fan motor needs no annual maintenance.

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Variable speed ECM motor and two stage gas valve for precise airflow
• Compatible with comfort sync communicating thermostat
• Self diagnostics saves last 5 fault codes regardless of power interruption

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Compact height for installation in low ceiling applications
• Qualifies as a low leakage air-handling unit
• Self diagnostics saves last 10 fault codes regardless of power interruption.
• Ultra Low NOx Gas Furnace

A furnace can do more than make you feel comfortable. It can also make you feel confident. AC Pro builds every furnace to deliver on both counts. From rugged construction to energy efficiency to fast installation, it’s the right choice to make every time.

• Communicating control enabled
• Thermostat flexibility:works with the Comfort Sync T-Stat or a conventional 24V T-Stat
• Self diagnostics saves last 5 fault codes regardless of power interruption
• "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements

An 80% AFUE* means the 80G1 converts a full 80% of the fuel it consumes into usable heat. That can help you spend less on energy every month

• Compact height for installation in low ceiling applications
• Self diagnostics help easily identify problems
• Qualifies as a low leakage air-handling unit

A-Series Packaged Gas/Electric 3 Ton 16 SEER 12 EER 208/230V Single Phase Two Stage Low Nox At AC Pro, creating the perfect system for you is our first priority. We recognize that buying a new packaged unit is a big decision. Having all the facts, and some professional advice, can help you select the system best suited for your home and your family’s needs.When selecting a unit, it’s important to remember that everyone’s needs are different.

• Heat exchanger is made of aluminized tubular steel for superior resistance to corrosion and oxidation.
• Heavy duty combustion air inducer pre-purges heat exchanger and safely vents flue products.
• The Tri-Diamond design eliminates issues caused by condensation developed during the cooling season.

A-Series Packaged Gas/Electric 3 Ton 14 SEER 11 EER 208/230V Single Phase Single Stage Low Nox If your home has a natural gas connection, the PRPGE14 gas/electric packaged unit could be the perfect choice for you

• Heavy-gauge galvanized steel base rails with rigging holes
• Copper tubing with enhanced fin coils
• Low profile, with compact footprint

The Pro Series is about control. It’s about creating your environment, your way. So your contractor will make sure you have the exact features you want in your Pro Series system, that match your exact needs.

• 5 year limited warranty
• Swept wing fan blade and compressor sound blanket significantly reduce noise levels
• Heavy-duty compressor sound blanket for quiet operation

The AC Pro system provides state of the art heating & air conditioning that won’t break the bank. With its ultra-efficient inverter technology, ultra-quiet sound levels and small size, it’s sure to be a fit for any home. Talk to your contractor about what options are available to best suit your needs.

• Condenser sizes can be converted using dip switch setting while out in the field.
• Compatible with any 24V thermostat including smart thermostats. Wide operating range for cooling demand in extreme high or low
• Compatible with any third party air handler, gas furnace not required.

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

•  Internally protected against high temperature motor overload conditions

The Pro Series is about control. It’s about creating your environment, your way. So your contractor will make sure you have the exact features you want in your Pro Series system, that match your exact needs.

• Dual fuel capability when paired with a matched gas furnace
• Comfort Sync thermostat and indoor unit required

The slim style design is about half the size or less than a traditional style condensing and will occupy less space.

• Uses Less Space Than a Traditional AC Unit
• Goldfin Coil Coating for Extended Protection

Delivers significant energy savings with up to 17 SEER2 when paired with a matching variable-speed or constanttorque furnace or air handler.

• Permanently lubricated condenser fan motor needs no annual maintenance.